Skip to content
KeysetDB

Keyset profiles.

Color gives a keyset its character. Profile gives it shape: the height of each key, the curve under your fingertips, and the way the rows meet your hands.

Reading the shape.

A cylindrical top has a trough running from front to back, with a curve across its width. A spherical top has a bowl-like depression that curves in both directions. These terms describe the touch surface, rather than the outline of the whole keycap.

A sculpted profile changes the height or angle between rows. A uniform profile uses the same row shape across the keyboard. Uniform keys are easier to rearrange between rows, provided their widths and mounts fit.

Profile, plastic, and legend process are separate properties. A profile name describes geometry; ABS or PBT describes material; doubleshot or dye sublimation describes how the legends are made. Read them together when comparing releases.

Height labels are relative, and manufacturers do not all use the same scale. A profile also cannot promise a particular sound: the rest of the keyboard and your typing both contribute.

Explore materials & legend processes

At a glance.

Six profile families, two manufacturers. Select a profile name to read more.

Comparison of keycap profile manufacturers, height, touch surfaces, and row shapes
ProfileManufacturerHeight / familyTop surfaceRows
CYLGMKCherry profileCylindricalSculpted
MTNUGMKMediumSphericalSculpted
SASignature PlasticsHighSphericalSculpted; kit-dependent
DSASignature PlasticsMedium in SP’s classificationSphericalUniform
DCSSignature PlasticsMediumCylindricalSculpted
DSSSignature PlasticsMediumSphericalSculpted

GMK.

CYL

Cylindrical tops · Sculpted rows · Doubleshot ABS

CYL is GMK’s original Cherry profile. Its cylindrical touch surfaces sit at different heights and angles across the rows, creating a shaped typing surface. The name distinguishes this familiar GMK geometry from the company’s other profile families.

GMK’s CYL sets use doubleshot ABS. The profile and construction are distinct facts: CYL names the shape, while doubleshot ABS describes the plastic and molded legends.

GMK: CYL keycaps ↗

MTNU

Spherical tops · Sculpted rows · Doubleshot PBT

MTNU brings spherical touch surfaces and rounded edges to GMK’s lineup. GMK describes it as medium-height, combining a retro appearance with a more moderate height than classic tall retro profiles.

Its rows are sculpted, and its keycaps use doubleshot PBT. Moving from CYL to MTNU changes both the shape beneath your fingers and the material, even when the two sets share a colorway.

MTNU also has its own 24-color X-prefix PBT stock palette. The available digital previews use corresponding classic ABS values; physical PBT colors may differ. Explore MTNU PBT stock colors.

GMK: MTNU keycaps ↗

MTNU over CYL.

Four row shapes, two outlines in each view. MTNU is traced from GMK’s published silhouette; CYL follows the independent Cherry/GMK reference. Follow the solid line for CYL and the dashed line for MTNU to compare the shoulders, height, and top angle.

  • CYLCylindrical · Sculpted
  • MTNUSpherical · Sculpted

R1

CYL and MTNU R1 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. MTNU has rounded shoulders; CYL has a straighter, more angular outline.BackFront

R2

CYL and MTNU R2 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. MTNU has rounded shoulders; CYL has a straighter, more angular outline.BackFront

R3

CYL and MTNU R3 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. MTNU has rounded shoulders; CYL has a straighter, more angular outline.BackFront

R4

CYL and MTNU R4 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. MTNU has rounded shoulders; CYL has a straighter, more angular outline.BackFront

Side silhouettes normalized to equal drawn base widths and aligned at the lower edge. This compares shape, rather than switch-mounted height; it is not a millimeter scale. A side view alone does not show the full dish. Source drawings and raster tracing limit precision.

References: GMK CYL ↗, GMK MTNU silhouette & rows ↗, Keycaps.info Cherry/GMK side profiles ↗.

CYL, one row at a time.

A common CYL layout uses R1–R1–R2–R3–R4–R4 from the function row to the bottom modifiers. Here, each distinct shape gets its own line at the same drawing scale.

R1

Function & number rows

Esc · F1 · 1 · 2

BackFront

R2

Q row

Tab · Q · W · E

BackFront

R3

Home row

Caps Lock · A · S · D

BackFront

R4

Z row & bottom modifiers

Shift · Z · Ctrl · Alt

BackFront

Simplified side views. Some kits offer R0 or R5 alternatives. Spacebars use a separate convex shape (4C), so the R4 outline above represents bottom modifiers, not the spacebar.

GMK row assignments & available keycap sizes (PDF, pp. 5–6) ↗ · Cherry/GMK side-profile reference ↗

Signature Plastics.

SA, DSA, and DSS have spherical touch surfaces; DCS has a cylindrical trough. Height, top shape, and row sculpting set these four families apart.

SA

High · Spherical · Sculpted

SA is the tall member of this group. Its spherical tops and substantial height give it a distinctive silhouette. The family supports sculpted rows, but some sets use a uniform row selection. Check the kit’s row specification rather than assuming every SA release has the same arrangement.

DSA

Uniform rows · Spherical

DSA keeps the same row shape across the board. Its spherical tops offer a cupped surface without a sculpted row progression. SP classifies DSA as medium profile in its specifications. Uniform geometry makes rearranging keys between rows more flexible; key widths and layout coverage still matter.

DCS

Medium · Cylindrical · Sculpted

DCS is SP’s medium-height cylindrical family. Its name refers to DIN standard, Cylindrical touch surface, and Sculptured profile. Unlike SA, DSA, and DSS, its touch surface forms a trough running from front to back rather than a spherical bowl.

Like GMK CYL, DCS changes height and top angle between rows. The shapes are similar, but the source outlines show a steeper DCS lower-row sculpt, especially at R4. SP’s drawing assigns R4 to bottom modifiers and includes a separate R5 function-row shape; check the kit’s actual row selection. The comparisons below focus on R1–R4.

SP: family names & origins ↗ · DCS family drawing ↗

DSS

Medium · Spherical · Sculpted

DSS combines spherical tops with a sculpted row progression. It is shorter than SA and gives an alternative to DSA’s uniform arrangement. Row placement matters when assembling a kit.

Signature Plastics: keycap family specifications & drawings ↗

SA, DSA, DSS & DCS, overlaid.

SA’s taller silhouette, DSA’s repeating shape, DSS’s spherical sculpt, and DCS’s cylindrical sculpt share a baseline. DSA uses R3 throughout; the other families use the labeled row. SP’s drawings show R3 for bottom modifiers in SA and DSS, and R4 in DCS.

  • SASpherical · Tall, sculpted
  • DSASpherical · Uniform
  • DSSSpherical · Sculpted
  • DCSCylindrical · Sculpted

SA / DSS / DCS R1 · DSA R3

SA and DSA and DSS and DCS R1 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DSA repeats its R3 shape in all four comparisons.BackFront

SA -13° · DSA 0° · DSS -1° · DCS -1°

SA / DSS / DCS R2 · DSA R3

SA and DSA and DSS and DCS R2 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DSA repeats its R3 shape in all four comparisons.BackFront

SA -7° · DSA 0° · DSS 3° · DCS 3°

SA / DSS / DCS R3 · DSA R3

SA and DSA and DSS and DCS R3 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DSA repeats its R3 shape in all four comparisons.BackFront

SA 0° · DSA 0° · DSS 8° · DCS 7°

SA / DSS / DCS R4 · DSA R3

SA and DSA and DSS and DCS R4 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DSA repeats its R3 shape in all four comparisons.BackFront

SA 7° · DSA 0° · DSS 16° · DCS 16°

Angles are SP’s printed labels in its sign convention. The DCS drawing’s slopes differ from those labels by up to 1.63°; its contours are preserved as drawn. DSA’s R3 is repeated. DCS R5 and convex spacebar shapes are excluded.

Side silhouettes normalized to equal drawn base widths and aligned at the lower edge. This compares shape, rather than switch-mounted height; it is not a millimeter scale. A side view alone does not show the full dish. Source drawings and raster tracing limit precision.

Reference drawings: SA ↗, DSA ↗, DSS ↗, DCS ↗.

DCS over CYL.

Two cylindrical, sculpted families, compared row by row. Follow the solid line for GMK CYL and the dash-dot line for SP DCS. Both have relatively level upper rows and increasingly inclined lower rows; the DCS drawing shows a steeper R4 top than the CYL reference.

  • CYLCylindrical · Sculpted
  • DCSCylindrical · Sculpted

R1

CYL and DCS R1 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DCS uses SP’s published contours; CYL uses a simplified independent Cherry/GMK reference. These are different source types, not measured cross-sections.BackFront

R2

CYL and DCS R2 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DCS uses SP’s published contours; CYL uses a simplified independent Cherry/GMK reference. These are different source types, not measured cross-sections.BackFront

R3

CYL and DCS R3 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DCS uses SP’s published contours; CYL uses a simplified independent Cherry/GMK reference. These are different source types, not measured cross-sections.BackFront

R4

CYL and DCS R4 side profiles, overlappingSource-derived outlines aligned at the bottom edge and normalized to the same drawn base width. Back is on the left, front on the right. DCS uses SP’s published contours; CYL uses a simplified independent Cherry/GMK reference. These are different source types, not measured cross-sections.BackFront

DCS follows SP’s vector drawing; CYL uses the simplified independent Cherry/GMK reference already used above. Differences in corner detail reflect those source styles as well as profile shape. DCS’s printed R1–R4 angles are −1°, 3°, 7°, and 16°; the illustration’s slopes differ by up to 1.63°. R5 and convex spacebars are excluded.

Side silhouettes normalized to equal drawn base widths and aligned at the lower edge. This compares shape, rather than switch-mounted height; it is not a millimeter scale. A side view alone does not show the full dish. Source drawings and raster tracing limit precision.

References: SP DCS drawing ↗, GMK CYL ↗, Keycaps.info Cherry/GMK side profiles ↗.

Read the kit, too.

A matching switch mount is only the start. Check key widths, spacebar sizes, layout support, and row assignments. Row numbers belong to a manufacturer’s profile system; an R3 key from one family is not necessarily the same shape as an R3 key from another. For sculpted profiles, the right legend on the wrong row can sit at an unexpected angle.

Browse the archive